Basic Info
Model NO.: TD3-90
Standard: GB, ASTM
Forming: Hot-Rolled Steel
Member: Steeltruss
Carbon Structural Steel: Q235
Application: Steel Workshop, Steel Structure Platform, Steel Fabricated House, Structural Roofing, Frame Part, Steel Walkway and Floor, Steel Structure Bridge
Top Bar Diameter: From 5-12mm
Distributing Bar Diameter: From 4-10mm
Girder Height: From 100-150mm
Origin: Xiamen, China
Type: Reinforcing Steel Bar
Trademark: Carbon Structural Steel, Shengxin JKS
Connection Form: Bolt Connection
Type of Steel For Building Structure: Fire-Resistent Steel
Residential Wall Structure: Wall Support
Sheet Type: Td3-90
Bottom Bar Diameter: From 5-12mm
Girder Width: 100-150mm
Specification: SGS BV
HS Code: 72104900
Product Description
Anti-earthquake Construction Material Truss Decking Sheet is a composite of corrugated sheet and steel bar truss which replace wooden template to bear all the comstruction loads in the construction phase and participate in bearing structure load in the service stage. Composite deck is floor deck which replace all or part of the force steel bar and work together with concrete to in service stage, whilt steel sheet of steel truss deck does not participate in bearing structure load, it's non-composite deck.
Specifications:
1. Top bar diameter : from 5-12mm
2. bottom bar diameter :from 5-12mm
3. Distributing bar diameter: from 4-10mm
4. bar length:from 3-11.8m
5. girder width:100-150mm
6. girder height: from 100-150mm
At present, multistory and tall building usually take profiled steel sheet with some ribs -concrete composite floor,which has the disadvantages of high thickness, reducing inner height of building, unflattering of under floor, lots of reinforcement binding, hard control of distances between ribs and thickness of concrete.
To solve these problems, we research and develop the Third Generation profiled steel products-Steel Truss Deck.
Instead of normal concrete formwork and composite steel decking. our product has advantage as follows:
1)saving labor,time,cost. (easy assemble,reinforced bar be prefabricated )
2)better mechanical structure model.
3)no fire resistant and corruption maintain demand.(compare with steel deck)
widely applied in steel structure floor,roof,steel-concrete composite slab
Specifications:
1. Top bar diameter : from 5-12mm
2. bottom bar diameter :from 5-12mm
3. Distributing bar diameter: from 4-10mm
4. bar length:from 3-11.8m
5. girder width:100-150mm
6. girder height: from 100-150mm
At present, multistory and tall building usually take profiled steel sheet with some ribs -concrete composite floor,which has the disadvantages of high thickness, reducing inner height of building, unflattering of under floor, lots of reinforcement binding, hard control of distances between ribs and thickness of concrete.
To solve these problems, we research and develop the Third Generation profiled steel products-Steel Truss Deck.
Width | 576mm |
Overlap Width | 570mm |
Maximum length | 11.8m |
Height | 70-270mm |
Top and bottom bar diameter | 6-12mm |
Cross bar diameter | 4-8mm |
Decking thickness | Galvanized steel sheet 0.5mm |
Application area | Multi-layer buildings |
Slab of reinforced concrete structures | |
Precast reinforced concrete floor | |
Irregular buildings(rounded, oval, and other shapes) | |
Large span structure | |
Lower board structure | |
Thick board structure | |
Leaning roof | |
Housing steel structure | |
Advantages | Economy: The mode of truss is reasonable with low price and has an obvious advantage in this area; Can be designed as double-sides deck. |
Convenience: Shorten the project construction time; Reduce temporary support. | |
Security: Good performance of cracking resistance and fire resistance; | |
Reliability: good property to prevent earthquake. |
1)saving labor,time,cost. (easy assemble,reinforced bar be prefabricated )
2)better mechanical structure model.
3)no fire resistant and corruption maintain demand.(compare with steel deck)
widely applied in steel structure floor,roof,steel-concrete composite slab